Nortek IEI 232e Standalone User Manual

IEI 232e Standalone
TM
Keypad Installation/
Programming Manual
Contents
Section 1: Features and Product Description
1.1 Features
1.2 Product Description
Section 2: U.L. Requirements
Section 3: Specifications
Section 4: Mounting
Section 5: Wiring
5.1 Wire Harness Configuration
5.2 Wiring the 232e Keypad to a Maglock (Fail-Safe)
5.3 Wiring the 232e Keypad to an Electric Strike
(Fail-Secure)
5.4 Shunting a Normally Closed Zone
5.5 Wiring Remote Trigger as Request to Exit (REX)
Button and Door Contacts
5.6 Installing the Plug-On Relay Board
5.7 Wiring the Standalone Access Control Relays
Section 6: Testing the Keypad
Section 7: Programming
7.1 Programming Main Relay Time
7.2 Programming Users
7.3 Programming Keypad Options
Section 8: Troubleshooting
Section 9: Programming Mode Loopback
Section 10: Warranty
Manual Revision Date: 05/16/03 Firmware Version: 1.0b
Document # 6054004, Rev. 2.1 1

Nortek IEI 232e Standalone Specifications

General

Brand	Nortek
Model	IEI 232e Standalone
Category	Keypad
Language	English