Nortek YAP1F - Page 24

3DJH
User’s Manual of Remote Controller
ambient temperature.
4
）
Ambient temperature displaying will be exited after 5s and then set
temperature will be displayed.
（
8
）
Setting X-FAN function
1
）
In cool or dry mode, press X-FAN button to set X-FAN function.
2
）
When is displayed, X-FAN function is on.
3
）
When is not displayed, X-FAN function is off.
4
）
When X-FAN function is on, the water on the evaporator will be blown away
after turning off the unit to avoid mildew.
（
9
）
Setting health function
1
）
In unit on status, press HEALTH button to set health function.
2
）
When is displayed, health function is on.
3
）
When is not displayed, health function is off.
4
）
Health function is available when the unit is equipped with anion generator.
When health function is on, the anion generator will start operation, adsorbing
the dusts and killing the bacteria in the room.
（
10
）
Setting sleep function
1
）
In unit on status, press SLEEP button to turn on or turn off sleep function.
2
）
When sleep function is on, the unit will operate according to a series of preset
sleep curves.
3
）
Sleep function can not be set in fan mode and auto mode. After entering
sleep mode, auto quiet function will be turned on automatically. You can also
choose different quiet statuses or turning off quiet function.
（
11
）
Setting I FEEL function
1
）
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
2
）
When is displayed, I FEEL function is on.
3
）
When is not displayed, I FEEL function is off.
4
）
When I FEEL function is turned on, the unit will adjust temperature according
to the temperature detected by the remote controller to achieve the best
air-conditioning effect. In this case, you should place the remote controller
within the valid receiving range.
（
12
）
Setting timer
You can set the operation time of unit as you need. You can also set timer on and
timer off in combination.
Before setting, check if the time of the system is the same as the current time. If not,
p
lease set the time accordin
g
to current time.