Nortel 5530 - Meters

Filters and QoS Configuration for ERS 5500
Technical Configuration Guide v2.0 NN48500-559
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
41
11.3 Meters
To add a meter, enter the following command:
• ERS5500-48T(config)#qos meter <1-64000> name <name> committed-rate <1000-
1023000 Kbit/sec> max-burst-rate <1-4294967295> max-burst-duration <1-
4294967295> in-profile-action <1-64000> out-profile-action <1-64000>
To view the action number, enter the following command:
ERS5500-48T(config)#show qos action
Id Name Drop Update 802.1p Set Drop Extension Storage
DSCP Priority Precedence Type
_____ ________________ _____ ______ ____________ ___________ _________ _______
1 Drop_Traffic Yes Ignore Ignore High Drop ReadOnl
2 Standard_Service DPass 0x0 Priority 0 High Drop ReadOnl
3 Bronze_Service DPass 0xA Priority 2 Low Drop ReadOnl
4 Silver_Service DPass 0x12 Priority 3 Low Drop ReadOnl
5 Gold_Service DPass 0x1A Priority 4 Low Drop ReadOnl
6 Platinum_Service DPass 0x22 Priority 5 Low Drop ReadOnl
7 Premium_Service DPass 0x2E Priority 6 Low Drop ReadOnl
8 Network_Service DPass 0x30 Priority 7 Low Drop ReadOnl
9 Null_Action DPass Ignore Ignore Low Drop ReadOnl
64001 UntrustedClfrs1 DPass Ing 1p Ignore Low Drop Other
64002 UntrustedClfrs2 DPass 0x0 Priority 0 High Drop Other
QoS Meter Command Parameters
Parameters and variables Description
<metid> Enter an integer to specify the QoS meter; range is 1 to 64000.
name <metname> Specify name for meter; maximum is 16 alphanumeric characters.
committed-rate <rate> Specifies rate that traffic must not exceed for extended periods to
be considered in-profile. Enter the rate in Kb/s for in-profile traffic
in increments of 1000 Kbits/sec; range is 1000 to 1023000
Kbits/sec.
max-burst-rate <burstrate> Specifies the largest burst of traffic that can be received a given
time for the traffic to be considered in-profile. Used in calculating
the committed burst size. Enter the burst size in Kb/s for in-profile
traffic; range is 1 to 4294967295 Kbits/sec
max-burst-duration
<burstdur>
Specifies the amount of time that the largest burst of traffic that
can be received for the traffic to be considered in-profile. Used in
calculating the committed burst size. Enter the burst duration in
ms for in-profile traffic; range is 1 to 4294967295 ms.
in-profile-action <actid> Specify the in-profile action ID.
in-profile-action-name
<actname>
Specify the in-profile action name.
out-profile-action <actid> Specify the out-of-profile action ID.
out-profile-action-name
<actname>
Specify the out-of-profile action name.