EasyManua.ls Logo

Nortel 5530 - Page 55

Nortel 5530
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Filters and QoS Configuration for ERS 5500
Technical Configuration Guide v2.0 NN48500-559
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
54
ERS5500-24T# show ip dhcp-snooping interface 3-6,8-10
Result:
DHCP
Port Snooping
---- --------
3 Untrusted
4 Untrusted
5 Untrusted
6 Untrusted
8 Untrusted
9 Untrusted
10 Untrusted
Step 3 – To view the DHCP-Snoop binding, enter the following command, assuming we have
port member on ports 6 and 9
ERS5500-24T#show ip dhcp-snooping binding
Result:
MAC IP Lease (sec) VID Port
---------------------------------------------------------------
00-50-8b-e1-58-e8 10.62.32.10 691200 110 6
00-02-a5-e9-00-28 10.13.196.10 691200 220 9
Total Entries: 2
12.3.2.2 Verify ARP Inspection
Step 1 – Verify that ARP Inspection is enabled for VLAN’s 110 and 220
ERS5500-24T# show ip arp-inspection vlan
Result:
ARP
VLAN Inspection
---- ----------
1 Disabled
99 Disabled
110 Enabled
220 Enabled
700 Disabled
Step 2 – Verify all the access ports are configured for ‘untrusted’ – this is the default setting
ERS5500-24T# show ip arp-inspection interface 3-6,8-10
Result:
ARP
Port Inspection
---- ----------
3 Untrusted
4 Untrusted
5 Untrusted
6 Untrusted
8 Untrusted
9 Untrusted
10 Untrusted

Table of Contents