190 Configuring a data module
N0008589 3.3
Configuring a data module
DS30 bus 08 is reserved for configuring circuit switched B-channels as a WAN interface for the
Business Communications Manager. This allows the Integrated QoS Routing feature to create one
or more dial up ISDN connections via the PSTN network using PRI or BRI trunks. Business
Communications Manager automatically configures the Module type as a Data Module and sets
the Data module type to Baystack. Baystack is the only setting supported on Business
Communications Manager.
This section includes information about:
• “Viewing the data module settings”
• “Programming the BayStack settings”
Viewing the data module settings
Use the following procedure to view the current settings for the data module.
1 On the navigation tree, click the Resources key and click the Media Bay Modules key.
2 Click the Bus 08 heading.
The Bus 08 screen appears.
Programming the BayStack settings
When you select the BayStack data module, the following configuration settings appear:
• Line pool access
• Line assignment
• Interfaces
This section provides information about:
• “Fixed access” on page 191
• “Switched access (PRI & BRI)” on page 191
• “Line assignment” on page 192
• “Line pool access” on page 193
To Next Page
Loading...