Starting the NTP Client Service 751
Programming Operations Guide
Starting the NTP Client Service
If you set the NTPClient Service Start Type option to Automatic, the NTP Client service starts
automatically and will automatically start whenever Business Communications Manager is started
up or rebooted.
If you set the NTPClient Service Start Type option to Manual, you must start the NTP Client
Service the first time you configure the NTP Client settings. You must also start the NTP Client
Service whenever Business Communications Manager is started up or rebooted.
To start the NTP Client Service:
1 On the navigation tree, click the Diagnostics key and the Service Manager heading.
The Service List screen appears.
2 Scroll down the list of until the VoiceTimeSynch service appears.
3 Click the VoiceTimeSynch service.
4 On the Configuration menu, click Modify Services.
The Services List dialog box appears.
5 Configure the settings according to the following table.
6 Click the Save button.
Table 217 NTP Client Service settings
Attribute Description
Startup Select whether the NTP Client Service starts automatically.
Choose Automatic if you want the NTP Client Service to start automatically when Business
Communications Manager is started up or rebooted.
Choose Manual if you want to start the NTP Client Service manually.
Choose Disabled to disable the NTP Client Service.
Status Allows you to view and change the status of the NTP Client Service.
Choose Start to start the NTP Client Service. When the service successfully starts, the status
changes to Running.
Choose Stop to stop the NTP Client Service. When the service successfully stops, the status
changes to Stopped.
To Next Page
Loading...