242 System maintenance
For more information, see Procedure 71 “Creating service domain”
(page 134).
• UDP and CDP domains are configured correctly.
For more information, see Procedure 72 “Adding the UDP domain”
(page 135) and Procedure 73 “Adding the CDP domain” (page 135).
• Gateway endpoints for DAP and the signaling server are created.
For more information, see Procedure 74 “Adding Gateway Endpoint for
the signaling server ” (page 136).
•
Routing entries for UDP or CDP (equal to LOC or TSC) are added for
Gateway endpoint for DAP.
For more information, see Procedure 75 “Adding Gateway Endpoint for
DAP redirect server” (page 136).
The following figure shows a call flow for a call between two DECT
handsets.
Figure 35
Call flow for a call from DECT handset to DECT handset
If you cannot make calls to or from a DECT handset with SIPL
configuration
Perform the following steps if you cannot make calls.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.
To Next Page
Loading...
Need help?
General
