Nortel DMS-250 - Table MCLLICDR

9-10 Datafill and subscription parameters
297-2521-106 Standard 23.01 March 2001
Table 9-4
Table CLLI example field entries
(continued)
CLLI ADMININFTRKGRSIZADNUM
OTWAON2323H1 103 150 LA.54.LA
FPOT 51 0 MI
LKOUT 52 0 MI
IDLE 53 0 MI
CF3P (Note 1) 56 12 MI
TERM102T (Note 2) 57 10 MI
TERM102L (Note 2) 58 0 MI
TERM100Q (Note 2) 59 0 MI
Note 1: This pseudo-fixed CLLI code is associated with the 3-port conference circuits in a toll
switching unit.
Note 2: This recommended CLLI code is associated with the terminating 102 test lines in a
switching unit.
—end—
Table MCLLICDR
Table MCLLICDR associates the originating CLLI with the terminating
trunk group number identified in the call detail record (CDR). Table
MCLLICDR must be datafilled before restoring a load (after a load dump)
and after datafilling Table CLLI.
Fields
Table MCLLICDR contains two fields:
• CLLINAME (alphanumeric)—CLLI name. Enter any CLLI name that
exists in Table CLLI.
• EXTNUM (0 to 8191)—EXTernal NUMber. Enter the external value to
be associated with a CLLI name in the CDR.
Example
CLLINAME EXTNUM
DMODEMC 2145
TERM105T 2258