Need help?Do you have a question about the NorthStar Explorer 538 and is the answer not in the manual?
General| Receiver Channels | 12 |
|---|---|
| Waypoints | 500 |
| Routes | 20 |
| Track Log | 10, 000 points |
| Waterproof | IPX7 |
| Battery Life | Up to 18 hours |
| GPS Receiver | SiRFstarIII |
| Channels | 12 |
| Update Rate | 1 second |
| Display | LCD |
| Battery Type | 2 AA batteries |
| SBAS | WAAS/EGNOS |
| Dimensions | 2.2"W x 4.5"H x 1.3"D (56mm x 114mm x 33mm) |
Explains DANGER, WARNING, CAUTION symbols, disclaimer, and FCC statement.
Explains the purpose of each button on the control panel for navigation.
How to activate MOB feature to save position and navigate back.
Describes methods for navigating to points or following pre-defined routes.
Explains elements shown on the chart display, including position, scale, and symbols.
Covers creating, editing, and moving waypoints.
Procedures for editing, deleting single or all waypoints.
Step-by-step guide for creating and editing routes from chart or display.
Displaying, deleting routes, and navigating them.
Explains GPS, DGPS, and how the unit acquires satellite signals.
Procedures for updating fuel levels and viewing fuel status, speed, and range.
Configuring language, backlight, key beep, auto power, and factory reset.
Customizing chart rotation, palette, map datum, and display elements.
Configuring GPS source, DGPS, static navigation, and speed/course filters.
Setting up fuel tank size, engine count, calibration, and flow filters.
Guidance on selecting a position and mounting the display unit securely.
Solutions for common issues like power, display, language, and GPS problems.
Solutions for problems with fuel readings, flow rates, and economy calculations.
To Next Page
