Notifier ONYX Series User Manual

DN-6856 • 03/08/04 — Page 9 of 9
FSH-751: FlashScan® HARSH™ Hostile Area Smoke Head.
See DN-6875.
FSL-751: FlashScan® VIEW® laser photo detector. See DN-
6886.
LPX-751: Low-profile VIEW® laser photo detector. See DN-
5306.
B224RB: Low-profile relay base.
B224BI: Isolator base for low-profile detectors.
B710LP: Low-profile base. Standard U.S. style.
B501: European-style, 4" (10.16 cm) base.
FMM-1: FlashScan® monitor module. See DN-6720.
FDM-1: FlashScan® dual monitor module. See DN-6720.
FZM-1: FlashScan® two-wire detector monitor module.
See DN-6720.
FMM-101: FlashScan® miniature monitor module. See
DN-6720.
FCM-1: FlashScan® NAC control module. See DN-6724.
FRM-1: FlashScan® relay module. DN-6724.
FSM-101: FlashScan® pull station monitor module.
NBG-12LX: Manual fire alarm station, addressable. See
DN-6726.
ISO-X: Isolator module. See DN-2243.
XP Series: Transponder. See DN-0759.
XP5-M: FlashScan® transponder, five monitor points. See
DN-6625.
XP5-C: FlashScan® transponder, five control points or Form-
C relays. See DN-6625.
XP6-C: FlashScan® six-circuit supervised control module.
See DN-6924.
XP6-MA: FlashScan® six-zone interface module; connects
intelligent alarm system to two-wire conventional detection
zone. DN-6925.
XP6-R: FlashScan® six-relay (Form-C) control module. See
DN-6926.
XP10-M: FlashScan® ten-input monitor module. See
DN-6923.
XPIQ: Intelligent quad transponder. See DN-6823.
Other Options
DPI-232: Direct Panel Interface, specialized modem for ex-
tending serial data links to remotely located FACPs and/or
peripherals. See DN-6870.
LEM-320: Loop Expander Module. Expands each 640 to two
Signaling Line Circuits. See DN-6881.
TM-4: Transmitter Module. Includes three reverse-polarity cir-
cuits and one municipal box circuit. Mounts in panel module
position (single-address-style) or in CHS-M2 position. See
DN-6860.
NCM-W: Network Communications Module, Wire. Order one
NCM per network node (CPU-640 or NCA). See DN-6861.
NCM-F: Network Communications Module, Fiber. Order one
NCM per network node (CPU-640 or NCA). See DN-6861.
NCS-W or NCS-W-ONYX: Network Control Station, Wire.
UL-Listed graphics PC with 19" display and mouse. Order as
necessary for network systems. Each NCS consumes one of
103 network addresses. See DN-6868, ONYX™ DN-6869.
NCS-F or NCS-F-ONYX: Network Control Station, Fiber.
UL-Listed graphics PC with 19" display and mouse. Order as
necessary for network systems. Each NCS consumes one of
103 network addresses. See DN-6868, ONYX™ DN-6869.
VeriFire-TCD: VeriFire™ Tools CD-ROM. Contains pro-
gramming software for the NFS-640, NCA, and XPIQ. Includes
local panel connection cable. Programming PC requires a serial
port connection. See DN-6871.
ACM-24AT: ONYX™ Series ACS annunciator – up to 96
points of annunciation with Alarm or Active LED, Trouble LED,
and switch per circuit. Active/Alarm LEDs can be programmed
(by powered-up switch selection) by point to be red, green, or
yellow; the Trouble LED is always yellow. See DN-6862.
AEM-24AT: Same LED and switch capabilities as ACM-
24AT, expands the ACM-24AT to 48, 72, or 96 points. See
DN-6862.
ACM-48A: ONYX™ Series ACS annunciator – up to 96
points of annunciation with Alarm or Active LED per circuit.
Active/Alarm LEDs can be programmed (by powered-up switch
selection) in groups of 24 to be red, green, or yellow. Expand-
able to 96 points with one AEM-48A. See DN-6862.
AEM-48A: Same LED capabilities as ACM-48A, expands
the ACM-48A to 96 points. See DN-6862.
BAT Series: Batteries. NFS-640 utilizes two 12 volt, 12 to
55 AH batteries. See DN-6933.
PS Series: Batteries. NFS-640 utilizes two 12 volt, 12 to 55
AH batteries. See DN-1109.
NFS-LBB: Battery Box (required for batteries over 25 AH).

Notifier ONYX Series Specifications

General

Display	LCD
Compatibility	Notifier devices
Network Capability	Yes
Power Supply	120 VAC or 240 VAC (depending on model)
Communication	RS-485, Ethernet
Max Loops	10
Battery Backup	Yes
Certifications	UL, FM