15
CAUTION: The meter should be handled with care. Dropping,
rough handling, etc. may damage the meter. Also, protect
the meter from moisture, prolonged direct sunlight, and high
temperatures.
Overview
To perform a test, the operator simply inserts a test strip;
touches the end of the test strip to the blood drop until the
well of the test strip is full and the meter beeps; and obtains
a lactate test result in 13 seconds. The test result is auto-
matically stored into the meter’s memory. The operator can
recall, delete, and review test data resident in the meter,
including the average for each control and user prole’s
results.
Introduction
PN62659B1 Lactate Plus IFU EN.indd 15PN62659B1 Lactate Plus IFU EN.indd 15 8/5/22 11:54 AM8/5/22 11:54 AM
To Next Page
Loading...