1
1. Prepare the lancet.
a. Simply twist off the lancet cap:
Hold the lancet body and twist off the
lancet cap until you feel it separate
from the device.
b. Do not pull, just twist the lancet
cap. Dispose of the cap in a suitable
container.
NOTE: This lancet is for single-use
only. The needle retracts immediately
after sampling. This leaves the device
safe for immediate disposal into a
sharps container. To reduce the risk
of pre-analytical error, facilities should
consider using a 21-gauge lancet when
collecting capillary samples.
a
b
Quick Reference Guide
PN62659B1 Lactate Plus IFU EN.indd 1PN62659B1 Lactate Plus IFU EN.indd 1 8/5/22 11:54 AM8/5/22 11:54 AM