20
Setup
This section describes how to setup the Nova Lactate Plus
Meter. The operator can set the meter for local time and date,
have the beeper On or Off, enable the sample counter, and
set the date display format.
Installing the Battery (Replacing)
The meter is powered by 2 AAA batteries. Install/Replace
the battery as follows:
1. Remove the back battery cover on the meter.
2. Install 2 AAA batteries. Make sure the positive and
negative ends are facing the correct direction. (If
replacing the batteries, remove the used batteries
and replace with new batteries.)
3. Replace the battery cover. The software version
and the default date and time will appear for 3 sec-
onds.
PN62659B1 Lactate Plus IFU EN.indd 20PN62659B1 Lactate Plus IFU EN.indd 20 8/5/22 11:54 AM8/5/22 11:54 AM
To Next Page
Loading...