Controller MCTRL660 User's Manual
www.novastar.tech 17
7.4.4 Loading Cabinet Files
After the screen is powered on, you must load cabinet files first if the cabinet fails to display normally. The
cabinet files must be sent to the MCTRL660 through the NovaLCT-Mars beforehand. The following
figures show the procedure:
1) Save the configuration file of cabinet
Click to save the configuration file of cabinet (.rcfg) to the local file of PC after the
configuration of receiving card has been completed.
XI'AN NOVASTAR TECH CO., LTD
To Next Page
Loading...
