20
ML0035 September 27, 2017 Copyright 2017 Bitronics, LLC
UL61010-2-30, Edition 1 – Issue Date 2012/05/11
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 2: Particular Requirements for Testing and Measuring Circuits
CSA C22.2 No. 61010-1-12-CAN/CSA, Edition 3, Issue Date 2012/05/01
CAN/CSA Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use – Part 1: General Requirements
CSA C22.2 No. 61010-2-30-12-CAN/CSA, Edition 1 – Issue Date 2012/05/01
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 2-030: Particular Requirements for Testing and Measuring
Circuits
If applicable, the CE mark must be prominently marked on the case label.
European Community Directive on EMC (EMCD) 2014/30/EU, superseding
2004/108/EC and Directive 91/263/EC [TTE/SES].
European Community Directive on Low Voltage (LVD) 2014/35/EU,
superseding 2006/95/EC
The object of the declaration described above is in conformity with the relevant Union
harmonization legislation: Directives 2004/108/EC & 2006/95/EC (until April 19
th
, 2016) and
Directives 2014/30/EU & 2014/35/EU (from April 20
th
, 2016).
Product and Generic Standards
The following product and generic standards were used to establish conformity:
Low Voltage (Product Safety)
IEC 61010-1, Edition 3, Issue Date 2010
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 1: General Requirements
IEC 61010-2-30, Edition 1 – Issue Date 2010
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 2-030: Particular Requirements for Testing and Measuring
Circuits
EMC: EN 61326-1: 2013 (Supersedes EN61326-1: 2006), EN 61000-6-2: 2005 + AC:
2005 (supersedes EN 61000-6-2:2005),
EN 61000-6-4: 2007 + A1:2011 (IEC date 2010)
Radiated Emissions Electric Field Strength
EN 55011: 2009 + A1: 2010
EN 55011: 2016
EN 61000-6-4: 2007 + A1:2011 (IEC date 2010
Group 1, Class A
Frequency: 30 - 1000 MHz
AC Powerline Conducted Emissions
EN 55011: 2009 + A1: 2010
To Next Page
Loading...
Need help?
General