26
ML0035 September 27, 2017 Copyright 2017 Bitronics, LLC
Several instruments may be mounted on a 19" Rack panel if desired. Three units will
fit side by side on a standard 5.25" high panel. Figure 2 indicates the dimensions of
the panel hole cutout. Leave adequate space surrounding the instrument when
determining mounting arrangements.
2.7 Cleaning
Cleaning the exterior of the instrument shall be limited to the wiping of the instrument
using a soft damp cloth applicator with cleaning agents that are not alcohol based, and
are non-flammable and non-explosive.
To Next Page
Loading...
Need help?
General