EasyManuals Logo

Novation Impulse User Manual

Novation Impulse
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
English
Power Requirements
Impulse is powered via its rear panel USB connector. Normally, DC power will be supplied by
the computer to which Impulse is connected through a standard USB cable. We recommend
that you connect Impulse directly to a computer’s native USB port, and not via a USB hub.
Correct operation cannot be guaranteed if a hub is in use.
If you wish to use Impulse as a stand-alone MIDI controller for other hardware MIDI sound
sources (or other devices) without a computer – as you might in live performance, for example –
you should obtain an AC-to-DC USB mains adaptor, which you should plug in to Impulse’s USB
port in the same way as a standard USB cable. When using this method, please ensure that
your local AC supply is within the range of voltages required by the adaptor BEFORE you plug
it into the mains. Please contact your Novation dealer for advice on suitable mains adaptors if
you are in any doubt.
A word about laptops:
When powering Impulse from a computer, you should be aware that although
the USB specication agreed by the IT industry states that a USB port should
be able to supply 0.5 A at 5 V, some computers - particularly laptops – are
unable to supply this current. Unreliable operation may result in such a case.
When powering Impulse from a laptop’s USB port, it is recommended that the
laptop is powered from AC mains rather than its internal battery.
Glossary
Certain terms are used throughout this User Guide which may be new or unfamiliar to some
users. We have listed a few of them here to help you understand the Guide more easily.
Arp
Short for Arpeggiator, an Impulse feature. Arp mode lets you set up rhythmic patterns of notes
using the drum pads, and modify them in real time (great for live performance!), changing the
pattern length, the pattern itself and the way certain notes are accented.
Clip launch
This is a term specic to Ableton Live including the Lite version supplied with Impulse. Within
Ableton Live Lite, a Clip is essentially a sound le (of any duration) which can be assigned
to any DAW Track. Provision has been made for launching Clips directly from drum pads on
Impulse.
DAW
Digital Audio Workstation. An alternative term for your music creation/recording/editing
software.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Novation Impulse and is the answer not in the manual?

Novation Impulse Specifications

General IconGeneral
Velocity SensitiveYes
AftertouchYes
Faders9
Knobs8
Transport ControlsYes
ArpeggiatorYes
Keyboard TypeSemi-weighted
Aftertouch TypeChannel
Key Count25, 49, 61
Pads8
DisplayLCD
MIDI I/OMIDI In/Out
PowerUSB powered
TypeMIDI Controller
ConnectionsUSB, MIDI In/Out, Sustain Pedal
SoftwareAbleton Live Lite, Novation Bass Station
Pads TypeVelocity-sensitive backlit pads
ControlsKnobs, faders, buttons, pads
Display TypeLCD
Pedal InputsSustain, Expression
Software IncludedAbleton Live Lite, Novation Bass Station
Power SupplyUSB
Dimensions (49-key)864mm (W) x 332mm (D) x 100mm (H)
Weight (49-key)5 kg

Related product manuals