Novation Impulse - ASSIGNABLE CONTROLS - PARAMETERS AND RANGES; Faders, Encoders, Mod Wheel Parameters; Drum Pad Parameters; Button Parameters

39
English
ASSIGNABLE CONTROLS –
PARAMETERS AND RANGES
Faders, encoders and Mod Wheel:
Subsequent presses of the + button will offer the following parameter setting pages:
Type: CC (Continuous Controller)
CC#:(Controller number, 0 to 127)
Max: (Maximum parameter value, 0 to 127)
Min: (Minimum parameter value, 0 to 127)
Channel: MIDI Channel to be used (1 to 16, or tPL) ; tPL is as dened within the template
Ports: MIDI port to be used (tPL, USb, MId, ALL)
Type: rPn (Registered Parameter Number)
MSB: (Most Signicant Byte, 0 to 127)
Bank LSB: (Least Signicant Byte, 0 to 127)
Max: (Maximum parameter value, 0 to 127)
Min: (Minimum parameter value, 0 to 127)
Channel: MIDI Channel to be used (1 to 16, or tPL) ; tPL is as dened within the template
Ports: MIDI port to be used (tPL, USb, MId, ALL)
Type: nrP (Non-Registered Parameter Number)
MSB: (Most Signicant Byte, 0 to 127)
Bank LSB: (Least Signicant Byte, 0 to 127)
Max: (Maximum parameter value, 0 to 127)
Min: (Minimum parameter value, 0 to 127)
Channel: MIDI Channel to be used (1 to 16, or tPL) ; tPL is as dened within the template
Ports: MIDI port to be used (tPL, USb, MId, ALL)
Drum pads:
Type: not
Note: C-2 to G8
Max: (Maximum parameter value, 0 to 127)
Min: (Minimum parameter value, 0 to 127)
Channel: MIDI Channel to be used (1 to 16, or tPL) ; tPL is as dened within the template
Ports: MIDI port to be used (tPL, USb, MId, ALL)
Type: CC, rPn and nrP: as for encoders/faders
Buttons:
Type: CC
CC#:(Controller number, 0 to 127)
Btn.Type: sgl
Value: (0 to 127)
Channel: MIDI Channel to be used (1 to 16, or tPL) ; tPL is as dened