17
ADVAnCED MoDE tEMPLAtE oVERVIEW
A ‘Template’ in the ZeRO SL MkII is a layout of controls stored inside of the ZeRO SL MkII memory. They are remembered
even when you turn the unit on and off. All of the hardware controls are used to send out MIDI data of some kind with the
exception
of the following:
Automap System Buttons – These are reserved for the Automap Template only so are unavailable for the Advanced
mode templates.
Hold Preview and touch or press any assignable control to display that row’s controls on the ZeRO SL MkII’s LCD screen.
For example, by holding the Preview button and touching the third vertical fader, the parameter names and values
assigned to all eight faders are displayed on the LCD.
Page Up / Down buttons – press up once to display the type of MIDI message e.g CC or Sysex. Press up again to display
the output port settings e.g. M1 (MIDI out 1) or U1 (USB port 1)
SPEED DIAL
The speed dial / template knob has two functions.
Speed Dial mode: The speed dial can be used to control any on-screen parameter that can be altered using the mouse.
Simply move the mouse cursor over the parameter you want to change then rotate the knob to control it.
Note: The Automap Server software must be running for this function to work.
Template mode: Press down on the knob to display the list of templates.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
![Preview: Novation Launchpad Mini [MK3]](https://data.easymanua.ls/products/284351/200x200/novation-launchpad-mini-mk3.webp)
