6
HARDWARE oVERVIEW
ASSIGnABLE ContRoLS
These are controls that can be assigned to parameters of the software or hardware you are controlling:
1) 8 touch sensitive endless rotary encoders with LED rings: These controls have no end points, so offer full 360˚
of movement. These controls offer speed dependent variable resolution, so moving the encoder slowly gives finer
resolution than moving the encoder quickly.
2) 8 touch sensitive pots: These controls have fixed end points and offer 300˚ of movement.
3) 8 touch sensitive 60mm sliders.
4) 1 touch sensitive 45mm Horizontal / Cross Fader
All touch sensitive controls are responsive to contact with skin, so simply touching any of the above controls will highlight
the parameter name and value on the LCD screen.
5) 32 buttons: All buttons are back-lit with LEDs.
6) 6 Transport buttons: 6 of the 32 assignable buttons can be switched to function as dedicated transport buttons.
7) 8 velocity-sensitive drum trigger pads.
1
2
5
7
5
3
4
6