User Manual TXLD0012
P/N T2-UM-E-ENG Rev 10 Novoxel.com Page | 21
Chapter 3: Package Contents & the Unboxing Process
The Tixel2 system is supplied in rigid packaging. Open the box and place all components on a dry, stable,
clean surface. The Tixel2 device is provided with a Tip, mounted on the Handpiece.
The contents of the package is described in the following table:
Handpiece/s Receiving Inspection – Content and Functionality Verification
Visually inspect (bare eye examination) the Novoxel
®
Tips on any Handpiece prior to first operation to
verify that:
The vertices of the pyramids are uniform and intact.
The Tip is clean and unscratched.
The Tip is centered in relation to the Distance Gauge when the Tip passes through it.
In case of any fault, contact your vendor.
Item # Description Quantity
1 HandpieceTixel2 Console x 1
2 HP Cradle x 2
3 Standard Tixel2 Handpiece x 1
4 Periorbital Tixel2 Handpiece x 1
5 This User Manual x 1
6 Power Cable x 1
The packed product may be heavy and should be handled with care. The system
installer may require suitable means of lifting and/or moving the product to avoid
physical injury.
The handles on the product packaging are designed exclusively to enable personnel to
transport the product. It is therefore not permissible to use the handles to fasten the
product to or on transport equipment or vehicle. The user is responsible for securely
fastening the products to the means of transport or lifting or on any of them.
To Next Page
Loading...