User Manual TXLD0012
Page | 42 Novoxel.com P/N T2-UM-E-ENG Rev 10
Tip Sterilization
Sterilization of the Novoxel
®
Tip shall be automatically performed before the system enables operation.
The Tixel2 device performs automated dry-heat sterilization. The process is performed after selection of
working parameters by the user and their confirmation in the “Operate” screen, which has been described
previously in this document. The process is 1:00 minute long. The Tixel2 device will notify when the
sterilization process has been completed and the device is ready.
The Cleaning process described above should be performed prior to your navigation to the “Operate”
screen. Sterilization will be performed as part of the “Operate” screen process.
When performing sterilization, the following screen will be displayed:
The Sterilization Screen
To Next Page
Loading...