User Manual TXLD0012
Page | 48 Novoxel.com P/N T2-UM-E-ENG Rev 10
Further considerations, which apply when determining treatment intensity parameters:
The patient’s comfort level in previous treatments and after them.
The patient has an observed skin response (erythema, inflammation, etc.).
Device Preparation
Prior to treatment, Tip cleaning and automatic sterilization should be performed.
Clean the distance DG with 70% medical grade alcohol before and after every treatment.
Routine Treatment
The treatments should be at least 4 weeks apart. In case of thin/sensitive skin, consider longer healing
periods between treatment sessions.
The caregiver performing the treatment should always wear disposable gloves during
treatment.
During treatment, manual pulse overlapping of pulses is not prohibited, but should be
pursued with caution. It is advised to perform the treatment in a pre-determined,
systematic, directional manner.
To Next Page
Loading...