– use an USB drive instead.
NetRemote does not show or
connect to A120+
1. Reopen the App.
2. If you have several streaming from several devices at
the same time, it may cause crash, reboot A120+
and/or your device.
All other undetermined cases.
A120+ may process large amount of data after a period
of operation, no matter in which mode, it will cause the
system freeze or malfunction. Reboot A120+ if
necessary.
The normal function of the product may be disturbed by
strong Electro-Magnetic
Interference. If so, simply reset the product to resume
normal operation by following the instruction manual. In
case the function could not resume, please use the
product in other location.
The device may malfunction when used in areas with
strong radio interference. The device will work properly
again once there is no more interference.
To Next Page
Loading...
