25
GENERAL MAINTENANCE
REFER TO IMPORTANT SAFETY INFORMATION SECTION
DAILY INSPECTION AND MAINTENANCE
The functions that the Demolition Grab performs are demanding jobs in tough
environments. Therefore, it is extremely important that the following maintenance and
inspection procedures be performed daily.
Grease all lubrication points! Use moly EP2 or equivalent grease. Lubrication
points are at the following locations as shown on page 27.
Check for oil leaks at the Cylinder Piston Rod and all of the Demolition Grab’s hoses
and fittings.
Check all fasteners for looseness. Retighten if necessary.
Inspect all welds and repair as necessary.
Inspect the hydraulic hoses for wear, damage or oil leakage.
To Next Page
Loading...