NPK
- 3 -
SAFETY
Safety notices in NPK Instruction Manuals follow ISO and ANSI standards for
safety warnings:
DANGER (red) notices indicate an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING (orange) notices indicate a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION (yellow) notices indicate a potentially hazardous situation,
which, if not avoided, may result in minor or moderate injury.
ATTENTION (blue) notices in NPK Instruction Manuals are an NPK
standard to alert the reader to situations which, if not avoided, could
result in equipment damage.
WARNING and BASIC OPERATING INSTRUCTIONS decals are included with each
NPK hammer and installation kit. Decals must be installed in the cab, visible to the
operator while operating the hammer.
STAY CLEAR, PRESSURE VESSEL, GAS PRESSURE and TOOL SHARPENING
decals are installed on all NPK hammer models. Keep them clean and visible. NPK will
provide decals free of charge as needed.
1. Operator and Service personnel must read and understand the NPK INSTRUCTION
MANUALS to prevent serious or fatal injury.
2. FLYING DEBRIS CAN CAUSE SERIOUS OR FATAL INJURY.
Keep personnel and bystanders clear of
hammer while in operation.
Do not operate HAMMER without an impact
resistant guard between HAMMER and
operator. NPK recommends LEXAN or
equivalent material, or steel mesh.
Some carrier manufacturers offer demolition
guards for their machine. Check with the
carrier manufacturer for availability. If not
available, please call NPK.
3. Do not hardface or sharpen the tool point with
a cutting torch. Excessive heat from torching
or welding can cause embrittlement, breakage,
and flying pieces. Resharpen by milling or
grinding only, using sufficient coolant.
Warning Decal for Cab Installation
To Next Page
Loading...
