- 17 -
LUBRICATION
GREASING PROCEDURE
1. Place the hammer in a vertical position, applying enough down force to push the tool
up into the hammer.
2. Turn the machine off.
3. Grease the hammer until grease begins to come out around the tool and lower
bushing.
4. Grease hammer at least once an hour. See “Correct Grease and Grease Intervals”
for a more exact greasing procedure.
APPLY DOWN FORCE TO PUSH TOOL UP INTO HAMMER
NOTE: USE A GOOD QUALITY EP #2 LITHIUM BASED GREASE WITH WEAR
INHIBITING ADDITIVES, SEE PAGES 18 AND 19.
To Next Page
Loading...
