- 30 -
OPERATION
SAFE OPERATING INSTRUCTIONS
DO NOT OPERATE THE HAMMER WITHOUT AN IMPACT RESISTANT
CAB WINDOW OR SHIELD IN PLACE!
BEWARE OF FLYING DEBRIS FROM THE HAMMER TOOL POINT!
An impact resistant cab window or shield must be in place to protect the operator.
Do not use the hammer in a way as to cause rock, etc. to be thrown towards the cab.
DO NOT USE THE HAMMER AS
A HOIST
The hammer is not intended to lift an
object. To do so, can be dangerous!
DO NOT TOUCH HOT TOOL
AFTER USING
!
To Next Page
Loading...
