- 60 -
GAS CHARGE
GAS CHARGING KIT
(Part Number 7300588)
ALL NPK HYDRAULIC HAMMERS are furnished with the following gas charging kit. In
addition, a nitrogen tank and pressure regulator valve (not furnished with the hammer)
is required. These can be obtained from your local welding supply house. An optional
regulator valve, part no. 21101060, is available from NPK.
g1. CHARGE ADAPTER (PART NO. 30604040)
g3. PLUG (PART NO. 30102050)
g4. HOSE (PART NO. 20118010)
g5. CHARGING KIT BOX (PART NO. 35001030)
g7. OPTIONAL REGULATOR VALVE
(PART NO. 21101060)
To Next Page
Loading...
