APPENDIX APPENDIX 1. PASSWORD FUNCTION
APPENDIX 1-3. Password Setting Procedures
Sets the password by the following procedures.
Displays the mode selection screen.
Keeps pressing [MODE] key more than 1 second.
POSITION and MODE display areas are blinking, and
changes to mode selection screen.
Changes the mode.
Repeatedly presses [MODE] key, and selects the
operation (RUN) mode.
Displays the password edit screen.
Hold down [-] keys of DOG and POSITION,
and then presses [MODE] key.
“En” and “PAS” are alternately blinking in the
POSITION display area.
Displays the current password input screen.
Presses [SET] key.
“OLD” turns ON in the POSITION display area.
Password edit screen
Operation (RUN) mode Switch setting (SET)mode Parametr setting (PRM) mode
Press three keys at a time.
To Next Page
Loading...
Need help?
General
