NSD VARICAM VS-5F Series User Manual

107
APPENDIX APPENDIX 1. PASSWORD FUNCTION
APPENDIX 1-2. Cautions when Setting the Password
● Important
Keep the password in a safe place.
The mode of VARICAM couldn’t be changed if you forgot the password. As the result, setting values of the
parameter and the switch output cannot be change or read by the panel side operation of VARICAM.
When using the setting and editing software “VS-5F-EDW2”, setting values of the parameter and the switch
output are able to read, but not able to write. (*1)
The password can be neither read nor written. (*2)
In this case, the initialization operation should be done. However, setting values of the parameter and the switch
output are deleted after the initialization operation. (*3)
*1: It is available when selecting “0” at the parameter No.85 (protocol).
*2: If the parameter No.85 is selected a number except “0”, setting values can be read and written by
communication regardless of whether the password is set or not. Restrict to prevent reading and writing
setting values by the host controller.
*3: Refer to the “12-3. Initialization Operation”.
● Password memo
VARICAM users and machinery manufacturers who set the password must notate it for remembrance' sake.
Password memo
Check
Ask the password
Ask machinery manufacturer the password
Manufacturer：
Name ：
Contact
：
Person’s name

NSD VARICAM VS-5F Series Specifications

General

Brand	NSD
Model	VARICAM VS-5F Series
Category	Switch
Language	English