7
EN DE FR ES IT PT
CAUTION
• Do not connect or disconnect the handpiece until the
motor has completely stopped.
• Connect ONLY to E type motors
(ISO 3964 (EN ISO 3964)).
• Do not exceed the Max. Rotation Speed (Motor) shown in
"11. Specifications".
5. Inserting and Removing the Bur/File
5-1 Inserting the Bur/File
FX15 / FX15m / FX23 / FX23m / FX25 / FX25m / FX75 / FX75m (Fig. 2)
1) Insert the bur/file until it is correctly secured in place.
2) Depress the Push Button and insert the bur/file into the
chuck until the bur/file "notch" mechanism engages.
Release the button.
3) Confirm that the bur/file is secure by gently pulling and
pushing the bur/file without depressing the Push Button.
CAUTION
• Only FX75 / FX75m can use file.
To Next Page
Loading...
