9
EN DE FR ES IT PT
• Always keep the bur/file shank clean. Dirt or debris in
the chuck could cause poor bur/file concentricity or low
chuck retention force.
• Always insert the bur/file all the way into the chuck. If
insertion is insufficient, premature failure of the bearings
or accidental release of the bur/file may occur.
• Do not exceed Max. Bur Length shown in
"11. Specifications".
• Always follow the instruction
s provided by the bur/file
manufacturer.
• Do not exceed the bur/file speed recommended by the
bur/file manufacturer.
• Do not insert or remove the bur/file until the rotation has
completely stopped.
• Do not apply excess pressure to the bur/file as it may
break or bend or become difficult to remove.
6.
Connection of the Spray Nozzle (FX22 / FX23 / FX23m / FX25 / FX25m)
1) Attach the Spray Nozzle (Optional) to the handpiece head
(Fig. 6).
2) Cut the Irrigation Tube to the desired length then connect
to the Spray Tube Nozzle on the motor (Fig. 6).
*Refer to "14. Option Parts List" to identify the correct cartridge.
To Next Page
Loading...
Need help?
General
