4.2.6 Menu 6 – Factory Restore
This option allows the user to restore the configuration data to the factory
default values.
Warning
A restore will overwrite all previous calibration data for the selected
sensor excluding those set at the factory.
• Press the MENU button to open the menu system.
• Using the NEXT and PREVIOUS buttons select menu option:
E:6
• Press ENTER button. Hold for 5 or 6 seconds.
• When - - - - is displayed, release the ENTER button.
Note: Pressing the MENU button rather than the ENTER
button exits the restore feature without performing any
change.
• Press the MENU button to close the menu system.
To Next Page
Loading...
