9.1.8 Cleaning Vaginal/Rectal probes
Carefully clean the probe after use.Wash the probe gently in mild soapy water,rinse and
make sure the probe is completely dry before returning to storage in the plastic bag.
9.1.9 Cleaning the water reservoir and hoses
Detach the vacuum cups from the vacuum cables.
Place a container filled with a cleaning liquid below the system.
Place the peripheral ends of the cables in the container.
Go to System Settings and select Tank Cleaning.
The water reservoir will be filled with the cleaning liquid until the water reservoir is full.
9.2 Warning Messages, Error Messages
9.2.1 Prompt tone
001
002
003
004
005
006
reason
Ultrasound applicar is
without load
Parameters is sett upper limit
Parameters is sett lower limit
Choose occupied channel
operation
Touch operation that is not
allowed
Touch option that cannot be
changed
N/A
N/A
N/A
N/A
N/A
N/A
Prompt tone
Prompt tone
Prompt tone
Prompt tone
Prompt tone
Prompt tone
Tooltip
Voice
Content
error code
System processing
Output pause，
system recover
output when
detecting load.
Parameters remain
in upper limit
Parameters remain
in lower limit
The operation is
invalid
The operation is
invalid
The operation is
invalid
67
Rehab-Series
To Next Page
Loading...
Need help?
General
