To Next Page

To Previous Page

10.1 Ultrasound parameters

Frequency.........................................................................1 MHZ,±10%;3 MHZ,±10%

Duty Cycles.............................................................10%-100%,Continues,stepping 10%

Pulse duration...........................................................1 – 9 ms ± 10 % (set by duty cycle)

PulseFrequency....................................................................................16，48，100Hz

Output Power

'XW\IDFWRUIRUFP²........................................................................0.5W-10.0W

'XW\IDFWRUIRUFP²........................................................................0.5W-15.0W

'XW\IDFWRUIRUFP²..........................................................................0.1W-2.0W

'XW\IDFWRUIRUFP²..........................................................................0.1W-2.0W

Output accuracy........................................± 20% (for any level above 10% of maximum)

Peak out Amplitude Duty

'XW\IDFWRU:FPò

'XW\IDFWRU:FPò

Treatment timer.............................................................................0 - 30 min ± 0.1 min

5 cm² Applicator

ERA (Effective Radiation Area) ................................................................................5cm²

Beam type:

1 MHz.........................................................................................................Collimating

3 MHz.........................................................................................................Collimating

BNR (Beam Non-uniformity Ratio)...............................................................5:1 maximum

1cm² Applicator

ERA (Effective Radiation Area).................................................................................1cm²

Beam type:

1 MHz..................................................................................................................1cm²

3 MHz..................................................................................................................1cm²

BNR (Beam Non-uniformity Ratio)...............................................................5:1 maximum

10. Specifications

Rehab-Series

Nu-Tek UT2200 User Manual

Questions and Answers: