Nu-Tek UT2200 User Manual

The main features of the REHAB SERIES devices are as follows: interference-free delivery of
shockwaves, interference-free control of all functions. Uninterrupted operation is not
required with the use intended.
Portable and mobile radio should
not be used any closer to the REHAB
SERIES devices, including cables,
than the recommended separation
distance calculated from the equa-
tion applicable to the transmission
frequency.
Recommended separation distance:
G ¥3
G ¥3IRU0+]WR0+]
G ¥3IRU0+]WR*+]
Where P is the rated power of the
transmitter in Watts (W) according to
the transmitter manufacturer and d is
the recommended separation
distance in meters (m).
According to an investigation in
situa, the field strength of stationary
radio transmitters should be less
than the compliance level at all
frequencies.
Interference may occur in the vicinity
of REHAB SERIES devices which is
marked with the following symbol:
The REHAB SERIES device is intended for operation in the electromagnetic environment
specified below. The customer or user of the REHAB SERIES should ensure that it is used
in such an environment.
Guidelines and manufacturer's declaration – electromagnetic interference immunity
Interference
immunity tests
IEC 60601-test level
Compliance level
Electromagnetic
environment-guidelines
Conducted
RF disturbance
variables
according
to IEC
61000-4-6
Radiated RF
disturbance
variables
according
to IEC
61000-4-3
3 Veffective value
150 kHz to 80MHz
3 V/m
80 MHz to 2.5GHz
3 Veffective value
150 kHz to 80 MHz
3 V/m
80 MHz to 2.5 GHz
84
Rehab-Series

Nu-Tek UT2200 Specifications

General

Brand	Nu-Tek
Model	UT2200
Category	Medical Equipment
Language	English