- 20 -
SPORTS
1) GPS
The watch has built-in GPS sensor, which can be used to accurately
record your motion track during exercise even without your phone.
After entering the GPS movement (Fast Walk, Run, Cycling or
Climb), then the watch starts searching for satellite signals, you can
skip this step at that moment by clicking on the „Skip” or wait for
the satellite signal to connect.
Note:
1. Synchronizing the watch and app before starting GPS movement,
refresh the data and wait for 1-2 minutes, which can improve the
speed of satellite positioning.
2. Positioning needs to be in an open area to avoid blocking satellite
signals by buildings or trees. Unable to locate indoors.
3. The screen should be oriented toward the sky, remain still and
wait for positioning satellites.
To Next Page
Loading...
