How to Use the Controller
- How to Use the Low Frequency Pad
Power supply
④ Press the low-frequency pad
( ) button and adjust the intensity
by pressing ▲or ▼.
(The intensity can be adjusted within
the range of 0 to 20. It will automatically
turn off when it is not in contact with a
human body.)
The low frequency pad automatically stops after operations
for about 40 minutes.
26
N6
27
③ When the power is off, press the low
frequency pad button( )
to turn it on.
(By default, it is set at ‘00’)
· Check out the connecting conditions
of the low frequency pad. (In case
there is no proper connection, ‘- -‘ will
show on the display)
When the cursor turns on, you can
adjust the intensity.
Connection
② Wear the abdominal band after fixing
the low frequency pad in a good
manner.
Various wearing methods
You may wear it around any area other than the abdominal area.
How to Use the Product
Towel for the low frequency pad
The low frequency pad is a device
to improve pain or amyotrophia
percutaneously by applying weak
current to the human body.
What is the low frequency pad?
Surface to contract the abdomen
① If there is no get at home, place the
wet low frequency pad towel or
a piece of 100% cotton towel or cloth
on abdomen and wear the low
frequency pad.
· When you wet a towel or a cloth with
water, please squeeze out completely
from flowing water.
Intensity control
Low frequency pad can be used for a user with waist size of 26-42 inches.
(By using the extension band, it can be used up to the waist size of 47 inches.
Please inquire if it is used for more than 47 inches.)
To Next Page
Loading...
