28
N6
29
Operations
Temperature control
Caution
③ Apply to the desired area.
· Put the external projector cover on
before applying it.
④ Ensure the external projector cover to
be covered while the external projector
is being used.
· Be aware that any direct contact from
the external projector to the skin during
the high temperature setting might
cause burns.
① Press SET button and hold it for
a little while, the clock icon blinks
and preheating mode is started.
It increases the temperature until
the internal projector reaches 60℃
and auxiliary heating part reaches
45℃.
(As the external projector(Abdomen
heating pad) is connected,
it becomes preheated up to 60℃)
Preheating function
How to Use the Controller
- How to Use the External projector(Abdomen heating pad)
How to Use the Controller
- Preheating function
How to Use the Product
① Press the external projector
(adbdomen heating pad) button
( ).
· Check out the connecting conditions
of the external projector(adbdomen
heating pad)
(In case there is no proper connection,
‘- -‘ will show on the display)
· Press the external projector(adbdomen
heating pad) button once: Select
· Press and hold: On/Off
(It automatically turns off after 8 hours.)
②
Press the external projector (adbdomen
heating pad) ( ) button and
adjust the temperature by pressing
▲or ▼.
(Moderate temperature: 55~60℃)
· The temperature increases until it
reaches the set temperature.
· Temperature setting unit
40~70℃: Temperature setting per 1℃
Applying to the specific area
* The method of using the abdominal heating pad is the
same as that of the external heating element.
To Next Page
Loading...
