9. PEAK SOUND LED (green)
OFF- the Beatkeeper is not detecting sound from the respective audio input
BLINKING- the Beatkeeper is detecting 'rhythm setting' sounds from the
respective audio input
ON- the Beatkeeper is waiting for the music to start on the respective audio
input
10. TEMPO DIFFERENCE GRAPH
OFF- One or Both of the audio inputs are not yet sync locked in
RED LED ON- The audio inputs tempos are not aligned
YELLOW LED ON- The audio inputs tempos are close to aligned
GREEN LED ON- The audio inputs tempos are perfectly aligned
11. BEAT OFFSET GRAPH
OFF- one or both of the audio inputs are not yet sync locked or are not sending
an audio signal
RED LED ON- the audio inputs beats are not aligned
YELLOW LED ON- the audio inputs beats are close to aligned
GREEN LED ON- the audio inputs beats are perfectly aligned
12. BPM RANGE BUTTON- Selects the range the Beatkeeper scans to find the
tempo of the audio inputs, Low (50 - 95 BPM), Medium (80- 150 BPM), or High (
130 - 199 BPM).
BPM RANGE LEDS
RED LED ON (L)- The Beatkeeper's BPM Range is set to Low. When the
Beatkeeper searches for the tempo of an audio input, the Beatkeeper is
scanning between 50 and 95 Beats Per Minute
YELLOW LED ON (M)- The Beatkeeper's BPM Range is set to Medium. When
the Beatkeeper searches for the tempo of an audio input, the Beatkeeper is
scanning between 80 and 150 Beats Per Minute
GREEN LED ON (H)- The Beatkeeper's BPM Range is set to High. When the
Beatkeeper searches for the tempo of an audio input, the Beatkeeper is
scanning between 130 and 199 Beats Per Minute
To Next Page
Loading...
Need help?
General
