15
15
EN
!
Using the handle position lever, (Fig.1)
Move the handle into the upright position,
(Fig.2)
Fill the clean-water tank to Max of 18 litresSlide the battery into the
battery compartment (Fig.6)
sealed correctly. (Fig.7)
Slide the brush / pad under the brush deck
(Fig.3).
Fit the brush / pad onto the Nulock drive
chuck, twist to lock the brush / pad in
place (Fig.4).
ALWAYS ENSURE THAT THE FLOOR IS PRE-SWEPT
AND RELEVANT SAFETY SIGNS ARE DISPLAYED.
TTB 1840 36V CONTENTS
Quick Set-up Guide
PLEASE READ BEFORE COMMENCING ANY OPERATION. AFTER THE REMOVAL OF ALL
THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
!
!
!
!
To Next Page
Loading...
