44
44
EN
Machine Operation
Lift the lever near the base of the handle and lock into position.
switches, pull trigger(s).
Overlap each scrubbing path by 10cm to ensure an even clean.
Do not operate the machine on slopes that exceed (2%),when full.
NOTE: Care must be taken to reduce speed when cornering or when
manoeuvring around obstacles
Machine In Use
! !
WHEN HANDLING CHEMICALS
Always ensure that chemical manufacturer’s safety guidelines are followed.
Only use chemicals recommended for use in auto scrubber-dryers.
!
IMPORTANT
Do not operate machine unless the
Operator Manual has been read
and fully understood.
!
To Next Page
Loading...
