Numatic TTB1840 NX - Changing the Floor-Tool Blades; Refitting the floor-tool blades

56
56

Floor-tool Overview
1. Retaining knobs x 4
2. Front blade (slotted)
3. Blade carrier
4. Rear blade
5. Floor-tool main body
!!
5
4
3
2
1




(Fig.B).


Note: The blades are designed to be reversible, thus extending their useful working life.

A
1
2
3
B
Replace the Squeegee blades using
replacement blade set (Fig.3),

location lugs.
Remove the blade holder (Fig.2).Unscrew the four knobs securing the
blade holder (Fig.1).
Changing the Floor-Tool Blades
! !
ALWAYS ENSURE THAT THE BATTERY IS REMOVED
PRIOR TO ANY MAINTENANCE OPERATION
EN