What to do if Numens 6002 Control Systems show Earth Fault?
If your Numens Control Systems indicate an Earth Fault, it could be due to a damaged conductor touching grounded equipment. To resolve this, systematically isolate each transmission path until you identify the faulty conductor. Then, trace that conductor to find where it's connecting to Earth.
Why does my Numens Control Systems show a Battery Fault?
If you are experiencing a Battery Fault with your Numens Control Systems, it could be because the battery is depleted from prolonged mains supply unavailability or a faulty battery charger. First, ensure the battery connections are secure. Then, measure the battery voltage; if it's below the manufacturer's minimum, replace the batteries. Finally, check the battery charging voltage to confirm the charger is working correctly.
How to fix Alarm Fault in Numens 6002 Control Systems?
If you encounter an Alarm Fault in Numens Control Systems, check the transmission path for any open- or short-circuits. Ensure the basic wiring is correct. If the problem persists, consider replacing the audio/visual alarm device.
How to troubleshoot Supply Fault in Numens Control Systems?
If your Numens Control Systems are experiencing a Supply Fault, begin by checking the power supply fuse and replace it if faulty. Also, verify the incoming mains supply voltage.
General| Brand | Numens |
|---|---|
| Model | 6002 |
| Category | Control Systems |
| Language | English |
To Next Page