Numens 6002 - Table of Contents

6002 addressable control and indicating equipment
Installation and Service Manual
© 2017, 2018 Ambest Electronics (Ningbo) Co Ltd. All rights reserved.
All specifications and other information were current at the date of publication and subject to change without notice.
Contents
1.
CONTROLS AND INDICATORS ................................................................................................................ 1
2. ACCESS LEVELS ...................................................................................................................................... 4
2.1. Access Level 1 ................................................................................................................................... 4
2.2. Access Level 2 (User Access) ........................................................................................................... 4
2.3. Access Level 3 (Installer Access) ...................................................................................................... 5
2.4. Access Level 4 (Engineer Access) .................................................................................................... 5
3. CONDITIONS ............................................................................................................................................. 6
3.1. Quiescent Condition .......................................................................................................................... 6
3.2. Alarm Condition ................................................................................................................................. 6
3.3. Actions During the Alarm Condition ................................................................................................... 6
3.4. Fault Condition ................................................................................................................................... 7
3.5. Actions During the Fault Condition .................................................................................................... 8
3.6. Disabled Condition ............................................................................................................................. 8
3.7. Test Condition ................................................................................................................................... 11
3.8. System Reset .................................................................................................................................. 12
4. TROUBLE SHOOTING GUIDE ................................................................................................................ 13
4.1. General Fault Indicator .................................................................................................................... 13
5. GLOSSARY AND REFERENCES ............................................................................................................ 14
6002 addressable control and indicating equipment forms the central part of a fire
detection and alarm system. 6002 is available with 2 addressable loops. The
control and indicating equipment is easy to install and commission. A central
microprocessor delivers reliable operation and requires minimum maintenance.
6002 control and indicating equipment is compatible with Numens addressable
detectors, and other devices, such as manual call points and audio/visual alarm
devices. They are suitable for small and medium-sized buildings.
This Manual provides users with instructions to operate the 6002 control and
indicating equipment using revision 1.0.1 operating firmware.