Nuna mixx2 User Manual

2322
EN EN
2
1
3
Reversing the Seat
The seat can be reversed to be parent-facing or
forward-facing.
1 - Squeeze the seat release buttons and lift seat up.
2 - Turn the seat to be parent-facing, and then re-insert
into the seat mounts until you hear them click
into place.
CHECK to make sure seat is securely attached by
pulling up on it.
Folding the Stroller
Before folding, push the canopy to rear of stroller.
4 - Squeeze the handle (1) on the back of the seat
and rotate the backrest to the stored position
(2).
5 - Pull up on the fold levers (3) and push the stroller
forward to fold.
6 - The storage latch will engage automatically when the
stroller is completely folded.
Use of Tether Strap
3 - Attach the tether strap to the stroller handle as
illustrated.
Put your hand through the loop end of the tether strap
when using the stroller.
Depending on models, tether strap may have been
attached permanently to the stroller handle in the
sales package.
6
5
3
4
1
2

Nuna mixx2 Specifications

General

Weight Capacity	50 lbs
Recline Positions	5
Harness Type	5-point
Wheel Type	All-terrain
Seat Recline Positions	5
Seat Facing Directions	Forward and Parent-facing
Suspension	All-wheel suspension
Frame Material	Aluminum
Brake Type	One-touch, rear wheel
Stroller Height	44.3 inches
Stroller Width	23.5 inches
Folded Width	23.5 inches
Seat Width	12 inches (30.5 cm)
Seat Depth	9 inches (23 cm)
Canopy	Extendable UPF 50+ canopy with flip out eyeshade
Front Wheel Size	7.5 inches
Brakes	One-touch, rear wheel
Compatible Car Seats	Nuna PIPA series
Fabric Material	Polyester