Nuna mixx2 User Manual

2726
EN EN
Raincover
WARNING
• TO AVOID POSSIBLE SUFFOCATION, NEVER place
your child into the stroller with rain cover attached during
hot weather.
• NEVER leave child unattended in this product.
• ALWAYS check that the rain cover has been cleaned
and dried before folding.
• DO NOT fold the stroller after assembling the rain cover.
• MAKE SURE the canopy is completely open before
attaching the rain cover.
6 - To assemble the stroller rain cover, place it over the
stroller seat exactly as shown.
5
4
6
Infant Car Seat Adapters (cont.)
4 - To remove car seat, press the buttons located on the
sides of the Nuna infant car seat and lift the carseat off
the adapters.
5 - To remove adapters, pull the release button on adapter
and lift the adapter off the stroller frame. Repeat on
other adapter.
If you have any problems using the infant car seat, please
refer to the infant car seat instruction manual.

Nuna mixx2 Specifications

General

Weight Capacity	50 lbs
Recline Positions	5
Harness Type	5-point
Wheel Type	All-terrain
Seat Recline Positions	5
Seat Facing Directions	Forward and Parent-facing
Suspension	All-wheel suspension
Frame Material	Aluminum
Brake Type	One-touch, rear wheel
Stroller Height	44.3 inches
Stroller Width	23.5 inches
Folded Width	23.5 inches
Seat Width	12 inches (30.5 cm)
Seat Depth	9 inches (23 cm)
Canopy	Extendable UPF 50+ canopy with flip out eyeshade
Front Wheel Size	7.5 inches
Brakes	One-touch, rear wheel
Compatible Car Seats	Nuna PIPA series
Fabric Material	Polyester