Operating Instruction and Documentation
Sprinter NT
- 24 -
•
Check for proper anchoring of the lift to the floor and floor cracks
•
Check for potential structural failures, in particular of welded parts
•
Check for bending or distortion of mechanical parts
Maintenance related:
•
Check for hydraulic/air leaks and condition of pipes/hoses
•
Check electrical connections, switches and fuses
•
Check for wear of all bearings, hinge points and shafts
•
Check condition of
lifting pads
•
Check for leakage to the in-ground lift canister
•
Check for corrosion building
3.Preventative maintenance by qualified technician
•
Replace
hydraulic oil
once every year
•
Replace
hydraulic hoses
at least once every 6 years
•
Take proper
Product care
as recommended in Point 1
•
Replace
Safety related
parts whenever there is the slightest doubt
•
Replace or repair worn or improper functioning
Maintenance related
parts, before they break down. This avoids costly repairs at a later date
Inspection, repair and maintenance may be done by technicians from Nussbaum,
Nussbaum's distributor or end-user. This personnel must be trained on the
particular
models of lift which they service. They must be able to make a judgment
as to the repair or
maintenance that needs to be done in order to ensure full safety,
operational reliability and
structural integrity during the life time of the lift. Proper
maintenance records should be
kept to back up possible warranty claims.
7.2 Cleaning of the automotive lift
A regular and appropriate maintenance served the preservation of the lift.
It can be a prerequisite for claims at possible corrosion.
The best protection for the lift is the regular cleaning of dirt of all manner.
- Including this:
• de-icing salt
• sand, pebble stone, naturail soil
• industrial dust of all manner
• water ; also in connection with other environmental influences
• aggressive deposit of all manner
• constant humidity by insufficient ventilation
To Next Page
Loading...
