NuTone NTBZ48 User Manual

22 Copyright © 2016 Broan-NuTone LLC
User Customizaon
Figure 24. Selecting Menu Mode
Figure 25. Menu Navigation
User preference sengs
• FAHRENHEIT OR CELSIUS: Select the temperature display mode.
• BACKLIGHT TIMEOUT: Sets the me from last buon press that the backlight will turn OFF.
Range: 10-30 seconds. Note: long backlight meouts will reduce baery life.
Note: If the thermostat is powered from 24VAC, the backlight meout can be set to “0” which will
keep the backlight on connuously.
• SENSOR CALIBRATION: Change the temperature calibraon by ± 7 degrees. Press the UP or
DOWN arrow buons to change to the desired display temperature.
• STATUS LINE: Sets Status Line to Setpoints or Clock mode.
MODE
FAN
Select
Done
Setup
PRESS DONE TO
EXIT BACK TO THE
MAIN THERMOSTAT
SCREEN
PRESS SELECT TO
ENTER THE DISPLAYED
MENU
MENU CHOICES ARE
DISPLAYED IN THE
STATUS DISPLAY LINE
USE THE 
BUTTONS TO CHANGE
TO THE DESIRED MENU
ITEM, THEN PRESS
SELECT
MODE
FAN
74
Off
Auto
TO SELECT THE
MENU MODE, PRESS
AND HOLD THE FAN
BUTTON UNTIL THE
SETUP SCREEN IS
DISPLAYED

NuTone NTBZ48 Specifications

General

Brand	NuTone
Model	NTBZ48
Category	Thermostat
Language	English